WE6…61 Hydraulic Solenoid Directional Valve
WE6…61 series solenoid directional valve is a high-performance directional control valve with spool structure,widely used to control the start,stop and direction of hydraulic oil flow.
| Model | Such as:4WE6H61/CW220-50N9Z5L, 4WE6J61/CG24N9Z5L,,4WE6J61/CW220-50N9Z5L,4WE6G61/CG24N9Z5L |
|---|---|
| Pressure | Up to 315 bar |
| Flow | Up to 80L/min |
| Voltage | DC 12V/24VIAC 110V/220V |
PRODUCT DETAILS
Parameter
| Hydraulic Section | ||||
| Maximum Operating Pressure Ports A,B,P | (MPa) | Up to 35.0 | ||
| Port T | (MPa) | Up to 21.0(一);up to 16.0(一)when the operating pressure exceeds the relief valve setting. For pilot-operated check valves A and B,Port T must be connected to the tank. |
||
| Maximum Flow | (L/min) | Up to 80(-);up to 60(~) | ||
| Fluid | Mineral oil,phosphate ester fluid | |||
| Viscosity Range | (mm²/s) | 2.8 to 500 | ||
| Temperature Range | (°C) | -30 to +80 | ||
| Fluid Contamination | Maximum permissible contamination class according to NAS 1638 Class 9. We recommend minimum filter rating β10≥75. |
|||
| Electrical Section | ||||
| Voltage Type | DC | AC | ||
| Applicable Voltage | (V) | 12,24,42,60,96, 110,180,205,220 |
42,110,120,230 50/60Hz |
|
| Power Consumption | (W) | 30 | 一 | |
| Holding Power | (VA) | 一 | 50 | |
| Inrush Power | (VA) | 一 | 220 | |
| Duty Cycle | 100% | |||
| Cycle Time to ISO 6403, Switching(ms) |
Switching (ms) |
25 to 4510 to 25 | 10 to 20 15 to 40 |
|
| Insulation Class | IP65 | |||
| Switching Frequency (cycles/h) | Up to 15000 | Up to 7200 | ||
| Note:Electrical connection must be grounded. | ||||
Model code
Function Symbols
If you are still unsure about which model to choose, please feel free to contact us. We will provide you with professional advice and guidance!